When you are setting up your home office or just doing some arrangement in the house or on your courtyard, you may face the hurdle of tangled unsightly cords. These make your home look messy and, in most cases, may result in injuries, especially if you trip on them. On this page, you can learn how do you install landscape lights in your home.
It is good to know some of the tricks you could use to hide those cords to make your home appear neat and also keep your loved ones and you safe. You also want to keep your living space from looking cluttered by at least tucking away those wires from the television, printers, or lamps. You can also ask for some assistance on Spring TX commercial electrical contractors to designate the wires properly.
What wattage should landscape lights be?
It is recommended that you look at lighting fixtures that hold bulbs of 40 to 80 watts but the best wattage for outdoor lights is 80 watts. Fortunately, this is the most common range for landscape lighting making them easy to find. This level of light will also limit light pollution caused by your landscape.
Sometimes these wires may be too long because they need to transverse from one side of the room to another. You, therefore, need to be creative. If you are dealing with electrical wires on the outside of a wall, then you will need to incorporate a cable management system, which is usually in the form of a wire raceway or a cable.
Depending on which wires you need to hide, there are several strategies that you could use. Read the tips below to help you understand how to hide cords.
How To Hide Cords Outside Of A Wall
The first thing that you need to do when you want to hide electrical wires outside of a wall is to locate the type of raceways that you will need for this task. You will find some on the internet, garden stores, discount stores, and even hardware stores. These raceways usually come in different styles and colors.
Some of them are made to cover basic wires, while others are designed specifically to cover cables or several wire sets. You need to determine which type will work for you best. The raceways vary with some being self-adhesive. The self-adhesive ones usually snap together and stick to the wall.
The other types are those that are mounted with screws through the woodwork or wall. Note that the ones with screw mounts usually last longer but they require a lot of work at the initial stage. The self-adhesive type is not preferred because it tends to get loose over time. However, this type is easier to mount as opposed to the screw mounts.
One common problem is how do you hide landscape lights in your courtyard. Some people run into it when installing outdoor lighting, however, it is better to hide the lights and wires in the right place. Properly concealing all of the electrical equipment is an important part of creating an attractive look for your outdoor space.
Clean The Area
After determining which type of raceway will work best, and buying it from the store, you need to do some cleaning. It is always advisable to clean the area where you intend to mount the raceway. This is especially recommended if you choose the self-adhesive option.
To clean the area, just take a rag, dip it in soapy dishwater solution then proceed to wipe the area where you will mount the raceway. When you are done wiping with the rag, rinse with clean water. Proceed to cut the raceway into pieces. Then run the piece of the raceway against the wall to where it is supposed to go.
Have a marker with you so that upon completion, you mark the end with a marker. Use a hacksaw to cut the plastic then continue to attach the raceway to the wall. You will realize that there are two parts of the raceway: the back piece and the front one.
Always remember that the back piece is the one that attaches to the wall while the front piece just snaps on top of the back piece, once it is put in place. After attaching the raceway, continue to run the wires along with the attachment piece and then follow closely with the front piece.